Waves in a Bed under Periodic Tangential Loading

The far-zone structure of the wave field in an elastic bed on a rigid foundation is considered. The wave field is generated by a tangential periodic force applied to the bed surface. The amplitude- frequency characteristics of surface vibrations for propagating modes are found. The partition of energy between different modes is considered.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 4, pp. 109–115, July– August, 2005.     

冲击荷载作用下粘土孔隙水压的数值分析

为了分析冲击荷载作用下粘土的孔隙水压力的增长规律，为分析粘土介质的动态响应、动力固结加固提供理论依据，将冲击瞬态荷载简化为三角形荷载，通过编制瞬变动态弹塑性有限元程序，对冲击荷载作用下粘土孔隙水压的动态响应进行了模拟，得出了冲击荷载作用下粘土孔隙水压的增长规律，发现孔隙水压力峰值无论是随水平距离还是随深度的增加均呈指数形式衰减，和实际工程施工中孔隙水压的监测数据相吻合。     

考虑几何与材料及静风荷载的非线性因素的大跨径桥梁静风稳定分析法

针对现有的桥梁静风稳定分析方法中存在的问题，提出了增量与内外两重迭代相结合的新方法，并且考虑了结构几何、材料和静风荷载非线性。在上述方法的基础上，编制了桥梁非线性空气静力稳定分析程序BNAP，并进行了相应的算例分析，所得结果表明该方法具有计算稳定和速度快的优点。最后，以一座主跨1000米的斜拉桥为例，分析了结构几何非线性、材料非线性和静风荷载非线性对大跨径桥梁空气静力稳定性的影响。     

A domain perturbation study of steady flow in a cone-and-plate rheometer of non-ideal geometry

The method of domain perturbation developed by Joseph is used to calculate velocity and stress profiles in a slightly misaligned cone-and-plate rheometer where the cone is spinning and the plate is stationary. Results for a Newtonian fluid, a Criminale-Ericksen-Filbey fluid, an upper-convected Maxwell fluid, and a White-Metzner fluid are presented and compared with earlier results in which the cone is stationary and the plate is spinning (Dudgeon and Wedgewood, 1993). Streamlines calculated for the Newtonian fluid show a very small recirculation region near the stationary plate. Velocity and stress contours are symmetric around the plane of largest gap width. For the elastic fluids studied, streamlines are asymmetric. The fluid response lags where the fluid is dominated by memory effects. Much larger recirculation regions are calculated for fluids dominated by shear thinning. These recirculation regions contain a large fraction of the fluid in the apparatus and have the effect of changing the shape of the flow domain for the remaining fluid that rotates around the cone's axis. Elasticity also has a pronounced effect on the stress profile, indicating that the accuracy of the cone and plate may be compromised even for small mis-alignments.     

Stability of corrugated composite noncircular cylindrical shells under external pressure

Cylindrical shells consisting of cylindrical panels of smaller radius and subjected to uniform external pressure are analyzed for stability. The geometrical parameters of the shells are approximated by Fourier series on a discrete set of points. The Timoshenko theory of shells is used. The solution is represented in the form of trigonometric series. It is shown that short-and medium-length shells with cylindrical panels are advantageous over circular shells. By selecting appropriate parameters of the panels, keeping the mass of the shell constant, it is possible to achieve a significant gain in critical loads. The shells under consideration are less effective than isotropic shells. Shells with sinusoidal corrugation under external pressure are of no practical interest __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 12, pp. 91–102, December 2007.     

大空间三向组合平板网架研究

利用中心节点、交叉梁、三角形拉杆和空心板所构成承力单元的组合以及内部支承柱的自由布置,本文提出了一种新型大空间三向组合平板网架结构。相关的TDGS分析系统针对原型试验取得了较好的模拟效果。通过引入柱的局部影响区域这一全新概念,系统总结了加入内部支承柱前后网架结构的内力和变形规律,进而为进一步的工程应用提供了可行性建议。     

载荷对Al2O3增强Y-TZP陶瓷磨损特性的影响

采用往复式摩擦磨损试验机研究了10%(质量分数计)Al2O3增强四方氧化锆多晶Y-TZP陶瓷材料(简称10ADZ)在不同载荷下的磨损行为与机制.结果表明:随着载荷的增加和滑动时间的延长,10ADZ陶瓷的磨损率增大,但并非呈线性增加,磨损率增长幅度不同;在62 N低载荷条件下,10ADZ陶瓷的磨损机制以犁沟和塑性变形为主;在124 N载荷下其主要的磨损形式为塑性变形、微切削和微断裂;而在310 N的高载荷下其主要的磨损机制为断裂磨损.     

单裂隙流-固耦合渗流的试验研究

通过对较大尺寸的单裂隙岩体试块进行不同侧面加载的渗流试验,在实验室里开展了单裂隙流 固耦合渗流研究,模拟核废料贮藏库的围岩自由面的最危险部位的渗流量 应力耦合状态。分析了裂隙岩体渗流与应力的耦合机理,获得了几种典型情况下的试验数据,并拟合出不同应力条件下单裂隙岩体渗流量与应力间数学经验公式。从而说明并非任一方向的应力增加都能使渗流量减小,而是裂隙岩体的渗流量随着双向压应力的增加而减少,随着平行于裂隙面方向的单向压应力的增加而增加。缝隙开度虽然随着法向应力的增加而逐渐减小,但最终不可能完全闭合,所以,此时流量不可能为零。同时,在试验过程中还通过闭环控制来实现被加载面的均匀受力,这为大尺寸岩体试验提供了一种很好的加载方法。     

在轴向气流作用下液体轴对称抛撒二次破碎的实验研究

液体轴对称抛撒的实验研究是以云雾爆轰武器的研制为背景的。为了研究轴向气流作用下液体轴对称抛撒二次破碎所形成的雾化场特性,本文利用两台激波管并对之加以改造,成功地在实验室实现了轴向气流作用下液体的轴对称抛撒。为了研究其雾化场的远场特性,本文利用激光粒子测量仪获得了在不同实验工况和不同位置下的雾化场SMD分布曲线。实验数据表明,由于轴向气流速度的增加,液体破碎的Weber数得到了提高,导致二次破碎初期雾化场的SMD随之减小;随着抛撒驱动压力的提高,二次破碎初期雾化场的SMD也随之减小;在同一工况下,雾化场SMD随着测量位置与喷口距离的增加而变大。     

连续体结构拓扑优化应力约束凝聚化的ICM方法

为克服应力约束下拓扑优化问题约束数目多、应力敏度计算量大的困难，提出 了应力约束化凝聚化的ICM方法. 在利用Mises强度理论将应力约束转换成应变能约束后， 提出了应力约束凝聚化的两条途径：其一为应力全局化的方法，其二为应力约束集成化的方 法. 由此建立了多工况下以重量为目标、以凝聚化应变能为约束的连续体结构优化模型，并 利用对偶理论对优化模型进行了求解. 4个数值算例表明：该方法具有较高的计算效率，得 到的拓扑结构比较合理，不仅适用于二维连续体结构，也适用于三维连续体结构.